home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 3
/
Cream of the Crop 3.iso
/
comm
/
ter12b.zip
/
TER12B._XE
/
MANUAL.EXE
/
HOSTSETT.HLP
< prev
next >
Wrap
Text File
|
1993-12-01
|
9KB
|
250 lines
^m╒═══════════════╤══════════════════════════════════════════╡^t Host settings ^m╞╕
│^r Host init ^m│ ^hATS0=0^M ^m│
│ ^nOpen system ^m│ ^hNo ^m│
│ ^nSend path ^m│ ^hUPLOAD\ ^m│
│ ^nReceive path ^m│ ^hDOWNLOAD\ ^m│
│ ^nShut down pwd ^m│ ^h........ ^m│
│ ^nAllow sound ^m│ ^hYes ^m│
│ ^nFax receive ^m│ ^hNo ^m│
│ ^nFax init ^m│ ^h ^m│
│ ^nFax answer ^m│ ^hFAX ^m│
│ ^nFax internal ^m│ ^hYes ^m│
│ ^nFax directory ^m│ ^hFAX\ ^m│
│ ^nFax command ^m│ ^hRCVFAX 2 /p:1 /r:0 /w:c:\terminat\fax ^m│
│ ^nExternal 1 ^m│ ^hDoorway DOOR.BAT !P !B ^m│
│ ^nExternal 2 ^m│ ^hBoot BOOT.COM ^m│
│ ^nExternal 3 ^m│ ^hBiModem BIMODEM.COM ^m│
│ │ ^n!P COM 1-8 !C=COM 0-7 !B Baud !0=Download-path ^m│
│ │ ^n!M Swap memory first !W Wait for return after ^m│
╘═══════════════╧═══════════════════════════════════════════════════════════╛^n
^hHost init-string^n
You must not setup the modem to answer the modem automatically. The S0
register holds the number of rings before answering - this should be set to
0, then Terminate rather than the modem will answer for you.
When Terminate gets the ring-string (RING), the answer-string (ATA) will be
sent and Terminate waits for a carrier.
^hOpen system^n
If the system is closed then only users defined in your setup will be
allowed to logon. If you have an open system, all users that call will be
able to log on - but only with normal user status and only able to up or
download with specified directories. If a supervisor logs on, complete
access will be granted whether the system is open or closed.
^hSend path^n
Users that are not supervisors are only allowed to download from this
directory.
^hReceive path^n
Users that are not supervisors are only allowed to upload to this
directory.
^hShut down password^n
If a supervisor logs on, the supervisor can shut down Terminate and exit
to DOS, so no one can call the hostmode again.
^hAllow sound^n
Make sounds when users disconnects, etc. You can still define the global
time period, but to be sure never to make any sound here, turn it off.
^hFax receive^n
Allow checking of the fax string and starting the internal or external
fax program.
^hFax init^n
In this version Terminate will only accept Class 2 Fax commands. Next
version will have a much improved fax-support.
Terminate uses 1-D modified Huffman. The baudrate must not be higher
than 19200 on some modems when using fax. The receive part has been
tested against 4 different modems without any problems. ZyXEL, Yoriki,
Smart Modem, TwinCom. Much more to come.
^hFax answer^n
When this string is received, the fax command will be executed.
^hFax internal^n
Use the internal smart receive in Terminate. Terminate will convert
all recieved pages to .PCX which can be converted to any other
format with programs like Graphics Workshop (GWS60.ARJ).
^hFax directory^n
Directory to store and process fax-pages in.
The filename can tell you when the fax was received:
DDHHMMNN.PCX
_/ | \________
/~ | ~\
Day in month Time of day Page number
DD 31=31.day 1603=16:03 01=Page 1
31160301.PCX : Received fax the 31. in this month at 16:03 page 1
If you want the specific date you could just test the filedate for the
file and see when it was created.
^hFax command^n
The default is a fax program for ZyXEL modems, but there are other similar
programs that can be called to receive a fax.
^hExternal utilities^n
Here you can define what external programs supervisors can call from
hostmode while logged on. You can setup any program you like and use all
the parameters you can see in the menu.
^hUsing the hostmode^n
The hostmode in Terminate is fully built-in, so you will not have to
setup anything at all. Just define the password for a user and you are
ready to go.
^bTerminate Host Mode^n
────────────────────────────────────────────────────────────────────────────
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒^m╒═══════════════════╡^t Status ^m╞╕^n▒▒▒^m╒════════════════════════════╡^t System ^m╞╕^n▒
▒^m│ │^n▒▒▒^m│ ^nEnvironment : AT BIOS (80486) ^m│^n▒
▒^m│ ^nWaiting for a call ^m│^n▒▒▒^m│^n Comm. : COM2,19200 8N1 ^m│^n▒
▒^m│ │^n▒▒▒^m│ ^nLast caller : ^m│^n▒
▒^m╘═════════════════════════════╛^n▒▒▒^m│ ^nOpen system : Yes ^m│^n▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒^m│ ^nMessages : No ^m│^n▒
▒^m╒════════════════════╡^t Modem ^m╞╕^n▒▒▒^m│ ^nFax Receive : No ^m│^n▒
▒^m│ │^n▒▒▒^m│^h Status Call Username ^m│^n▒
▒^m│ │^n▒▒▒^m│ ^nSupervisor No Bo Bendtsen ^m│^n▒
▒^m│ ^nATS0=0 ^m│^n▒▒▒^m│ ^nNormal No Guest ^m│^n▒
▒^m│ ^nOK ^m│^n▒▒▒^m│ ^nNormal No Terminat ^m│^n▒
▒^m│ │^n▒▒▒^m│ ^nNormal No ^m│^n▒
▒^m╘═════════════════════════════╛^n▒▒▒^m│ ^nNormal No ^m│^n▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒^m│ ^nNormal No ^m│^n▒
▒^m╒═════════════════════╡^t Time ^m╞╕^n▒▒▒^m│ ^nNormal No ^m│^n▒
▒^m│ │^n▒▒▒^m│ ^nNormal No ^m│^n▒
▒^m│^n 18.26 (Sun) 30-May-1993 ^m│^n▒▒▒^m│ ^nNormal No ^m│^n▒
▒^m│ │^n▒▒▒^m│ ^nNormal No ^m│^n▒
▒^m╘═════════════════════════════╛^n▒▒▒^m╘══════════════════════════════════════╛^n▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
════════════════════════════════════════════════════════════════════════════
^bEsc-Exit L-Logon E-Edit messages O-Open system Alt-J DOS^n
^hEsc^n
Exit the hostmode
^hL^n
Login locally to the hostmode - you should only need this when testing
hostmode.
^hE^n
If someone has written a note to you, you will be able to edit and
delete messages.
^hO^n
Toggle open system, look above for more info.
^bLogging in to the host mode^n
First the WELCOME.ASC will be shown (if available), then you will be
asked for a name and password. If callback is enabled, then Terminate will
hangup the line and callback to the number specified in the user record.
The user will then be asked the same password again and the session
continue in the normal way.
Normal users will only have access to the first line called 'Options',
supervisors will have access to everything. The following menu will
be presented.
^h
Options : (C)hat (M)essage (F)iles (T)ype (D)ownload (U)pload (G)oodbye
Supervisor: (E)rase (H)D-free (L)ocate (R)ead (S)hutdown (N)ew dir (I)nfo-HD
(1) Doorway (2) Boot (3) BiModem
Path : C:\TERMINAT\DOWNLOAD\
Command :^n
^hAlt-H^n
Will hangup and return to host menu.
^h(C)hat^n
Allows users to page you, the SysOp. Alt-Y will start chat.
^h(M)essage^n
Write message to you, the SysOp
^h(F)iles^n
Show files in current directory. If a FILES.BBS is present you will
be asked if you want to show that instead, just like BBS systems.
^h(T)ype^n
Type a textfile on screen.
^h(D)ownload^n
Download files, from current directory.
Only internal protocols that are available can be selected by the users.
Zmodem cannot be turned off.
^h(U)pload^n
Upload files into upload directory. Supervisors are asked to choose between
the default upload directory or current directory.
^h(G)oodbye^n
Logoff system.
^h(E)rase^n
Delete file in current directory.
^h(H)D-free^n
Show how much free space on current drive.
^h(L)ocate^n
Filefinder, allows you to search a drive for specific files. You are
allowed to use wildcards (?,*).
^h(R)ead^n
Read messages written by other users.
^h(S)hutdown^n
Shut down Terminate and exit to DOS.
^h(N)ew dir^n
Change to other directory.
^h(I)nfo-HD^n
Information on all drives available in your system.
^h(1),(2),(3)^n
Calls the external utilities.